Current’s NX Connect Cuts Wiring Time, Speeds Wireless Room Control
The NX Connect WA200 from Current Lighting offers a practical wireless room controller with fast installs and straightforward commissioning. It supports zonal control of 0‑10V fixtures in single-, dual- or three‑zone configurations, providing a flexible way to manage lighting loads without adding extra hardware. The 20A plug load rating means the controller can handle lighting and controlled receptacles in one device, reducing the number of boxes and circuits that need to be coordinated.
The knockout‑mount design keeps installation simple. Electricians can land Class 1 0‑10V connections directly, then bring the controller online through NX Connect’s wireless network. The platform uses the 802.15.4 standard with Bluetooth for local setup, so there’s no need to run low‑voltage network cables or coordinate with IT during rough‑in. Once powered, the controller joins the NX wireless mesh and syncs with sensors, switches and other room‑level devices.
The WA200’s wireless architecture supports distributed intelligence, so each device makes local decisions even if the network goes down. That reduces failure points and keeps spaces operational. The 2.4G radio is optimized for commercial environments with predictable performance across offices, education, healthcare and mixed‑use spaces.
With a wide operating temperature range from ‑20 to 65 degrees Celsius, the controller handles demanding environments without derating.
Technical Specifications of NX Connect WA200 from Current Lighting
- Zonal control supports single, dual or three 0‑10V zones
- Rated 20A for plug load and lighting control
- Wireless networked operation using 802.15.4 and Bluetooth
- Knockout mounting for simplified installation
- Class 1 connections for 0‑10V wiring
- 2.4G radio for commercial wireless performance
- Operating temperature range from ‑20 to 65 C
Learn more about the NX Connect WA200 wireless room controller at currentlighting.com.
