| |

Certolux Cleanroom LED Recessed Luminaire is Top Access Walkable

Certolux CRTA series cleanroom recessed luminaire

The CRTA series from Certolux, a Leviton company, offers serviceability from walkable composite ceilings and is installed within and supported by finished composite ceiling systems with thicknesses of 2, 3, and 4 inches.

Rated for an 800-pound static load without fixture damage, it features an overlapping gasketed door frame that seals the room at the ceiling. Additional gaskets at the lens and top cover prevent dust, liquid, or vapor penetration. The CRTA series is ETL certified for wet locations, cleanroom rated ISO-3, certified dust-tight, and water-resistant to IP65 for frequent rigorous cleaning practices. It has been tested according to ASTM-E72 and E2322 standards for strength and load resistance.

LED board modules are high efficiency and closely regulated to maintain CRI, color consistency, lumen
performance and efficacy. Select from 3000K, 3500K, 4000K and 5000K color temperatures with a color
consistency of 3 SDCM, standard 80 CRI, optional 90 CRI. Optional Amber LED arrays available alone or in
combination with white LEDs, Lifetime L70 is greater than 60,000 hrs. Modules are field replaceable and
commercially available.

Feartures

  • Up to 25000 lumens
  • Convenient Lift Handles
  • Serviceable from above
  • ETL Certified for recessed ceilings and wet locations under covered ceiling
  • NSF2 for Non-food zone, Splash Zone
  • IEC60598 IP65 Certified from below
  • Cleanroom classified ISO3-8
  • Optional certified for Class I, Div. 2 Groups A,B,C,& D

Options

  • Emergency Battery Backup Options**
  • Optional 90 CRI
  • Enhanced Lens Luminance

More information about the CRTA series cleanroom LED recessed luminaire from Certolux

CRTA series data sheet

Related Articles


Latest Articles

  • In Memoriam: Michael Doyle Leech of Stuart C. Irby Co.

    In Memoriam: Michael Doyle Leech of Stuart C. Irby Co.

    Michael Doyle Leech, age 72 of Franklin, Tenn., passed away on February 16, 2026. Rob Taylor, President of Sonepar Americas (which includes Irby) said, “Mike was a proud veteran and a devoted family man, qualities that shaped the way he led, served, and cared for the people around him. Few people have embodied dedication and Read More…

  • 3D Printing: Inside Lighting’s Next Revolution

    3D Printing: Inside Lighting’s Next Revolution

    While 3D printing in mass production was once a dream, advancements in the technology have moved it more into the mainstream. The technique, which is also referred to as additive manufacturing, has rapidly evolved from a niche prototyping tool into a transformative production method for many sectors, including the lighting industry. As manufacturers confront supply‑chain Read More…