US Lighting Trends

  

Part 1 of our Bluetooth Mesh knowledge series – written for USLT exclusively by Alex Heiphetz, Ph.D., CEO of AHG, Inc. – focuses on what Bluetooth Mesh brings to the table.

 

By Alex Heiphetz, Ph.D.

Most of the deployed lighting systems today are wired; however, wireless, especially Bluetooth Mesh systems, are catching up quickly for a number of reasons: Semiconductor companies are improving IoT products; new software makes working with them easier; and wireless lighting is gaining market share and is becoming customers’ preferred choice.

The primary difference lies in how wired and wireless lighting fixtures and controls communicate. In wired systems, they are connected, quite literally, with a wire. In wireless systems, lighting controls are powered by batteries and communicate with the luminaries through radio waves.Part 1 Bluetooth Figure 1

Another advantage of wireless lighting systems is the significantly lower cost of the installation and maintenance. They are also more flexible and scalable:

  • Wireless lighting systems require less preliminary planning, wiring, and hardware. The cost of materials and labor during the system installation is significantly lower.
  • It is easy to change the layout of the wireless lighting system, while it is close to impossible for the wired system.
  • Adding new devices, or relocating devices, in a wired lighting installation requires rewiring that could be unfeasible in the existing buildings. With the wireless installation, devices can be moved, added, or removed easily – and at any time – to accommodate changing occupancy and needs of the tenants
  • Grouping of the lights and connections of each group to the sensors or switches is pretty much set in stone for wired installations. With wireless, the grouping of devices can be easily changed using an app

With this in mind, it makes sense to take a closer look at the wireless lighting options.

Wireless lighting protocols: Bluetooth Mesh vs. Zigbee

Wireless protocol is simply a set of rules that wireless devices use to communicate. There are three main protocols for smart lighting systems: Bluetooth Mesh, Zigbee, and Thread. Thread is limited to small networks and geared toward smart homes, not commercial lighting. For commercial lighting, Zigbee and Bluetooth Mesh are the two main protocols.

There are plenty of articles comparing Zigbee and Bluetooth Mesh, with competing opinions. In reality, Zigbee and Bluetooth Mesh are very similar from the user’s point of view. Both systems are power-efficient and in each case, the device is interconnected with other devices in an arrangement called “mesh topology.” Mesh topology allows for large networks and the long-distance transmission of messages between switches, sensors, and luminaries. Both have robust security measures built in.

Some differences between them that might be important for a specific project are:

  • Zigbee performs better than Bluetooth Mesh in the very large lighting networks
  • Bluetooth Mesh handles mobile network devices better
  • Zigbee is older than Bluetooth Mesh and has a larger array of available products; however, Bluetooth Mesh is catching up quickly
  • Bluetooth chips might be used for multiple purposes and, therefore, tend to cost less than Zigbee chips

We should note, however, that there are two significant advantages of Bluetooth Mesh over Zigbee:

  • Bluetooth is natively supported by mobile devices. Therefore, Bluetooth Mesh lighting systems can be controlled by Android or iOS smartphones or tablets. You do not need additional hardware, such as gateways or special lighting control devices. This makes the system less expensive and more convenient to use for the end-customer. While it is possible to control Zigbee lighting network with a smartphone, it requires more expensive multiprotocol chips and custom firmware for translating Bluetooth messages to Zigbee.
  • Bluetooth Mesh nodes also support beaconing, allowing a lighting system to be used for asset tracking or indoor navigation without the need to install additional hardware

Given these advantages, let’s review Bluetooth Mesh in more detail.

Bluetooth Mesh at a Glance

Bluetooth Mesh specifications were developed and released in 2017 by Bluetooth Special Interest Group (SIG). Although Bluetooth Mesh can be used for any type of IoT devices and networks, it was designed with commercial lighting applications in mind.

In addition to basic operations – such as adding and removing devices from the network, grouping devices together, and controlling groups’ interaction – Bluetooth Mesh specifications include multiple standard models. Each model defines the communication rules for specific functionality, for example, turning the device on or off. Many of these models are designed specifically for lighting applications. Their features include light dimming, light color (temperature control, light hue, the dimming curve in response to a signal from a sensor or a switch), lighting scenes, schedules, and the way to report energy consumption, to name a few.

Part 1 Bluetooth Figure 2 400x275A smart lighting network might consist of luminaries, sensors, switches, and, optionally, a gateway. In a mesh, each device is connected to multiple other devices. Therefore, each of them can send and relay messages to its neighbors. This arrangement allows messages to travel over a long distance, far exceeding a normal Bluetooth communication range of just tens of meters. This makes mesh topology a perfect choice for IoT networks. It requires just one gateway for the entire network. In a Bluetooth Mesh network, a smartphone or a computer can be used as a gateway, and you can access and control all network devices with a smartphone from a single point.

Typical Bluetooth Mesh lighting network configuration includes adding new devices to the network (provisioning) and grouping the devices to define which switches and/or sensors control which group of lights. The provisioning and grouping are usually done on-site using an app. The groups' arrangement can be adjusted at any time after the initial installation to address changing needs of the building tenants.

After provisioning and grouping are done, the installers can optionally set and change various configuration parameters for the luminaries and sensors. The exact parameters depend on the specific devices and may include maximum and minimum dimming level, the default dimming level, sensor sensitivity, timing and light levels for the lights dimming up and down when a change in occupancy is detected, a maximum light intensity (in lux or footcandles), and more. Other options include setting the scenes (lighting scenarios that can be recalled with the switch or an app) and schedules. All parameters set during the installation can be adjusted at any time as needed.

Special mechanisms are built-in to ensure network security and reliable communication between Bluetooth Mesh network devices. All network messages have several levels of encryption. There are multiple options to tune Bluetooth Mesh network messaging for better performance. A network designer can control which network nodes can relay messages, how many hops a message can make before the network drops it, and how many times a single node can re-transmit the same message.

In Bluetooth Mesh, you can combine groups of devices with different functionality in one network. Each network message is directed to the devices with the specific functionality (in Bluetooth Mesh, this is called an application). Other devices can relay the message without processing it. This capability allows Bluetooth Mesh networks to have better area coverage and a more reliable transmission of the network messages. In a smart building, for example, HVAC equipment and thermostats can serve as transmitters of the lighting messages, but they will only react to HVAC system-related messages.

This article does not go into the technical details of the Bluetooth Mesh internal operations, which is a topic that requires several articles on its own. Instead, we are going to focus on the practical side of the Bluetooth Mesh lighting products development, distribution, and installation. If you are interested in the technical details, you can find a technical overview of the Bluetooth Mesh structure and internal operations here

 

Click here for Part 2 in our Bluetooth Mesh Series to learn the practical aspects of the Bluetooth Mesh lighting system.

Market Research

  • Prev
Editor Linda Longo recently sat down with the principals of the Pompeo Group to hear their ...
Through a first-of-its-kind collaboration, Ferguson, Holman, and Electrada have announced a fleet ...
Chicago-based PureEdge Lighting has won its patent infringement lawsuit filed last year on August ...
The construction industry added 32,000 jobs on net in July, according to analysis of data recently ...
The National Association of Home Builders weighs in on the "Inflation Reduction Act," which just ...
According to research conducted from May-June 2022 surveying top U.S. supply chain executives in a ...
Los Angeles-based Feit Electric Co., Inc. has acquired the LIFX assets from Lifi Labs, Inc.
Elemental LED Inc. is significantly expanding its Reno, Nevada factory to enable automation and ...
Finnish smart lighting control company Casambi has received ioXt Alliance cybersecurity ...
Montreal, Quebec-based LMPG Inc., formerly known as Lumenpulse Group Inc.,  has acquired a ...

New Products

  • Prev
The Lighting Controls Association is proud to announce the latest offerings in lighting controls ...
Automaker Hyundai reveals plans to introduce Hyundai Home energy ecosystem in early 2022.
At its virtual ESG (Environment, Social & Governance) event last month, Legrand unveiled its ...
Part 1 of our Bluetooth Mesh knowledge series – written for USLT exclusively by Alex Heiphetz, ...
Through a first-of-its-kind collaboration, Ferguson, Holman, and Electrada have announced a fleet ...
The Sensor Switch WPD Forward-Phase Dimmer Switch is an economical, energy saving option for ...
Traditional in appearance, not in innovation. From below the ceiling, the Juno Podz take ...
Flauta's cylindrical body comes in three different heights, two surface textures with the nine ...
UVLightFight UV-C lamps produce high UV-C radiance at 254nm for effective surface disinfection or ...
The Wave Switch features hands-free technology that allows you to control lights with a wave of ...

CMG-Kerrwil | 919.488.8635 | Raleigh , NC

©2022 All rights reserved

Use of this Site constitutes acceptance of our Privacy Policy (effective 1.1.2016)
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of Kerrwil